Why this happens
Most shutter noise comes from metal-on-metal contact where there should be smooth movement: dry guides, worn bearings, or a curtain rubbing where it shouldn't.
| Likely cause | Tell-tale signs |
|---|---|
| Squeaking | Dry guide rails or bearings, which need cleaning and lubrication |
| Grinding | Worn bearings, curtain rubbing a bent guide, or motor gearbox wear |
| Rattling or banging | Loose slats, loose guide fixings or a loose bottom bar |
| Scraping at one point | Dent in the guide or a slat shifting sideways |
| Loud motor whine | Motor straining from friction or wear |
Safe checks you can do first
- Look along the guides for dirt, rust or dents.
- Note where in the travel the noise happens: top, middle or bottom.
- Record a short video with sound.
What not to do
- Don't spray thick grease into the guides. It traps dust and makes things worse.
- Don't ignore grinding. It usually gets worse quickly.
💡 Fastest way to a fix: WhatsApp us a short video of the shutter (from a safe distance), a photo of the motor or lock area if visible, and your location. We'll usually be able to tell you the likely cause and a price range straight away.
How we fix it
Most noisy shutters are fixed with a proper service: cleaning and lubricating the guides and bearings, tightening fixings and adjusting alignment. Worn bearings, slats or guides are replaced where needed.
How much will it cost?
Servicing starts from $120 per shutter. Bearing, slat or guide repairs start from $150–$180.
Note on pricing: these are starting prices. The final cost depends on the complexity of the fault, shutter size and type, parts needed and site access. A site visit is needed for an accurate quote, and the site visit is free. See the full price list.